LAN Film Fill is widely used in counter flow cooling towers, the product is a cellular block after bonding molding, according to the interval size of the tower bracket, cut into different sizes. Easy to installation. High heat exchange efficiency, small wind resistance, no-easy plugged. PVC, PP material are both available. Customers can choose according to cooling media temperature.
.Características
■ Tecnologia avançada, design razoável, com bom efeito de resfriamento.
■ Boa ventilação, resistência reduzida, forte hidrofília, grande área de contato, boa formação de filmes, compactação fácil, boa condutividade térmica, boa estabilidade química, corrosão por ácido, álcali e solventes orgânicos, etc.
■ The staggered ring material form assembling, packing general is 60 ° Angle, polyvinyl chloride (PVC), polypropylene (PP) two kinds of packing material available.
Propriedades
With different request in LAN film fill, like length and width, materials or thickness, etc, please inform us your detailed request to get correct solution and offer. Newin could cover all customer requirements. Fill media in flame retardant or anti-bacterial execution are also available on request.
| Comprimento do Módulo (Max) |
mm |
3660 |
| Module Width |
mm |
305/610 |
| Module Depth |
mm |
— |
| Flute Height |
mm |
19/30 |
| Flute Corrugation Angle |
Graus |
－ |
| Surface Area |
m2/m3 |
150 |
| Sheet Thickness - Before Forming |
mm |
0.32 |
| Sheet Thickness - After Forming |
mm |
0.28 |
| Max. application temp. (short time) - PVC |
°C |
60 |
| Max.operating temp. (short time) - High temp. |
°C |
80 |
| Customized size and thickness available for special request. Contact Newin for details. |
Structure & Installation Drawing
Newin supply structure & installtion drawing advice with jobsite storage advice and quality control report along with shipment to make attention to customers when they receive the materals. OEM or special mold design also available on request.
Aplicação e Uso
Newin LAN counter flow film fill is applicable for other brands counter flow cooling tower series of LDCM, LDC, LDC-EPC, LNCM etc., with SGS test to keep high quality infill to get the high efficiency of the cooling tower. Inform us the tower model or size, we will estimate the Nos of sheets needed for your cooling tower replacing.
Normas Comerciais AplicáveisO material das folhas é rigorosamente seguido abaixo do teste SGS com as normas ASTM. Cada imóvel ou todos os imóveis testados abaixo pelos seus produtos também estão disponíveis mediante solicitação.
| Propriedade |
Test Method |
Valores |
| Specific Gravity |
ASTM D792-13
Method B |
1,426g/cm3 |
| Oxygen Index |
ASTM D2863-13 |
34.50% |
| Tear Strength |
ASTM D1004-13 |
X direction |
111 N |
| Y direction |
121 N |
| Tensible Test |
ASTM D 882-12 |
Tensile Strength |
X direction |
51,1 MPa |
| Y direction |
45,3 Mpa |
Elongation at
Intervalo |
X direction |
87% |
| Y direction |
56% |
| Valores shown above based on SGS Test No.: GZIN1708039662PS by Newin |
Statements and methods presented are based upon the best available information and practices
known to Newin. Conditions of use may vary and are beyond control, the user should undertake
sufficient tests to determine the suitability for any intended use of the material. |
Dados arquivados para substituição de preenchimento de filme de fluxo contrário
Preencha abaixo os dados de medições para sua torre de resfriamento de manutenção ou projetos de reparo, que exigem qualidade e confiabilidade, conte com Newin, visitas ao local ou serviço de manutenção, projetado para se encaixar nos preenchimento ou componentes da torre de resfriamento.
